Senrui Precision — CNC Cutting Material Database · Nine-dimensional Performance Atlas · Aluminum / Steel / Stainless Steel / Brass / Titanium Alloy / Engineering Plastics · Key Property Comparison
Nine-Dimensional Radar Chart Analysis
Key quantitative metrics for Senrui CNC common materials: grade coverage, machining characteristics, and performance boundaries.
Covering five systems—aluminum alloy, steel / stainless steel, brass, titanium alloy, and engineering plastics—click tags to filter quickly; click the cards above to view nine-dimensional atlas details.
| Grade | Category | Density g/cm³ | Tensile Strength MPa | Key Properties | Typical Applications |
|---|---|---|---|---|---|
| 6061-T6 | 6-Series Aluminum | 2.70 | ≥310 | Easy to Machine, Good Anodizing | Structure / Enclosures |
| 7075-T6 | 7-Series Aluminum | 2.81 | ≥570 | High Strength, Aerospace | Load-Bearing / Moving Parts |
| 2024-T4 | 2-Series Aluminum | 2.78 | ≥440 | High Strength, Hard Aluminum | Aerospace Structures |
| 5083-H111 | 5-Series Aluminum | 2.66 | ≥275 | Corrosion Resistant (Marine) | Shipbuilding / Welding |
| 6063-T5 | 6-Series Aluminum | 2.69 | ≥215 | Extrusion / Decoration | Profiles / Frames |
| 6082-T6 | 6-Series Aluminum | 2.70 | ≥310 | Load-Bearing, Easy to Machine | Structure / Frames |
| 2A12 | 2-Series Aluminum | 2.78 | ≥430 | Domestic High Strength | Aerospace / Tooling |
| 304 Stainless Steel | Stainless Steel | 7.93 | ≥515 | Corrosion Resistant, General Purpose | Enclosures / Food |
| 316L Stainless Steel | Stainless Steel | 7.98 | ≥485 | Pitting Resistant, Medical | Medical / Chemical |
| 45# Steel | Carbon Steel | 7.85 | ≥600 | Low Cost, Quenched and Tempered | Structure / Tooling |
| 40Cr | Alloy Steel | 7.82 | ≥980 | Load-Bearing, Quenched and Tempered | Shafts / Gears |
| H62 Brass | Brass | 8.43 | ≥370 | Free-Cutting, Electrically Conductive | Decoration / Connectors |
| C3604 Brass | Brass | 8.5 | ≥340 | Top Choice for Turning | Precision Turned Parts |
| TC4 (Ti-6Al-4V) | Titanium Alloy | 4.43 | ≥895 | High Specific Strength, Hard to Machine | Aerospace / Medical |
| PEEK | Engineering Plastics | 1.30 | ≥90 | High Temperature Resistant, Self-Lubricating | Metal Replacement |
| POM | Engineering Plastics | 1.41 | ≥60 | Low Friction, Precision | Gears / Slides |
Common questions on CNC cutting materials and selection, answered by our engineers.
Both metals (aluminum / steel / stainless steel / copper / titanium) and engineering plastics are supported; hard-brittle materials (e.g., hardened steel, PEEK) require corresponding tools and parameters.
6061 offers overall easy machinability, good anodizing, and low cost, suiting most structures; 7075 has high strength for load-bearing/aerospace but weaker welding and corrosion resistance.
Obvious work hardening and tool sticking; needs sharp tools, proper coolant and low speed with large feed.
High specific strength but poor thermal conductivity, prone to tool deflection and sticking; low cutting efficiency, high tool wear.
Yes — POM/PEEK/nylon etc. can be precision-machined; mind clamping to prevent deformation and heat dissipation.
Upload part drawings along with performance/budget requirements, and Senrui Precision CNC engineers will recommend materials, cutting tools, and process routes, delivering high-precision solutions from small to medium batches.